A2BMusic

Enjoy Life

Author: admin

Page 5/5

Blogging

How to hold your new Bass Guitar, the Best practice for Hand Position

If you have just picked up a bass guitar, I mean actually just picked it up from the store you will soon start picking up the technique to play it! Hopefully, it is not going to end up on a wall bracket.

If you are in the market for a new bass guitar, check out the best base guitar reviews in 2015.

Dedication is the key to learning any skill, especially when you need to start using muscles you didn’t even know were there. The reason being that the small muscle group in the hands and fingers needed for manipulating the neck and strings of your bass guitar are rarely used.

Bass guitar + amplifier = sound, and the good news is that it is not so difficult to get a good sound fairly early on with this equation, soon you will want to practice in every spare moment you have.

So here are some of the do’s and don’ts to help you with your hand position, assuming you are right handed, sorry left handers but you will have do it all in reverse.

Of course when you go to “live” gigs you can observe how experienced hold their bass guitars as well.  None of this is written in stone, yet.

So here we go;

  • Keep the end of your left thumb in the middle of the back of the neck of the bass
  • When reaching for notes, do not let your thumb go parallel to the neck, just shift your position instead
  • Use your left thumb as a pivot, keeping your elbow out form your body so that it can be free to swing back and forth
  • Curve the fingers of your left hand out over the neck to reach the notes on the thicker strings as your thumb pivots
  • Play the notes on the thinner strings with your fingers flattened more against the neck with your elbow pulled back and your left thumb standing almost straight out from the neck
  • Point your fingers slightly back toward the bridge so that the two fingers attack the string with about the same amount of force
  • Keep the fingers of your right hand fairly straight with just a slight bend at the joints
  • Use a walking like motion rather than plucking motion on the strings with the index and middle fingers of your right hand

If this all sounds very fiddly to you perhaps you can get a friend to assist you in the beginning.  It can be a very private thing learning to play especially in the early days so perhaps you can make a step by step recording of these instructions.

You have a good chance of avoiding hand repetitive strain injury by using this advice on technique.

There is not much to be done about your “bloody fingers” though!  Just take it easy; don’t over-do it to the point of drawing blood, no matter how tempting it may be to play day and night.

How Do Generators Work

Blogging

How do Generators Actually Work?

Electromagnetic induction is a phenomenon associated with the English physicist Faraday who discovered this in 1831, mechanical generators of all sizes are reliant on this technology of the changing of the magnetic field.

Although a generator can be as small and compact enough to power a single electrical appliance or large enough to power a whole city we are mainly concerned with emergency generators, either portable generators or standby generators also known as gensets.

If you would like more information on home generators and reviews of the best ones on the market today have a look at House of Generators,

How does electromagnetic induction come into it?

Faraday discovered that changing magnetic fields to a conducting wire produced a voltage in the wire.  When the wire forms a closed circuit a current will flow through it, this forms the principle behind electromagnetics. He also realised that the amount of electrical current produced was in proportion to the number of turns in the coil of wire.

How do generators change the magnetic field to generate electricity?

Quite simply two components working together are used to create the changes to the magnetic field to generate electricity; the stator and the rotor sometimes called the armature. The stator is a solid iron core with a conducting metal coil around, the rotor spins around it creating the changes in magnetism. The magnets in a home generator rotor will have permanent magnets. When the rotor completes a half-rotation the polarity of the generator changes and the generator produces an AC current, an alternating current.

The conversion

For smaller home generators supplying up to 5 kW of electricity the power to enable the spin action of the rotor is usually converted by a small gas powered engine.

For larger home generators, able to produce 10 kW or more tend to be powered by propane gas or diesel.

Portable generators; size, safety, noise

Portable generators are extremely flexible in that a small 900 w generator can be used for camping whilst they can go up to 17,000 kW of power!

Generators do create poisonous carbon monoxide gases which can be lethal so you do need a well ventilated area. Other safety aspects include heat and electrocution hazards plus the more obvious need to keep it dry!

Using a cover on your generator can help with the noise pollution and keep it dry.

Take a look at the link at the top of the page to see some of the best reviews and further information regarding home generators including portable and standby.

If you have invested a lot of money in your home already one of the best improvements you can make is to install a standby (genset) generator. As the price of property rises the need to be competitive in your presentation is all the more important.

Theme by Anders Norén